See first if the silicone spray will help with threading the awning welting into the track. If you have the Archwing awning, it may be that you're pulling the 'wings' too far out and exerting too much pressure to stretch the awning completely straight. And be sure that the section of track on the end that you've widened to be able to thread the welting into is not where the end of the welting is sitting - either be above or below the opening.
Sandra Rutan
--- In tabtrailers@yahoogroups.com, "floridatabber" <jojobe22@...> wrote:
>
> Do I try and get the proper track?
>
> --- In tabtrailers@yahoogroups.com, "Sandra" <sandra.rutan@> wrote:
> >
> > If you spray a little silicone in the track, the awning welting will slip right through; however, the factory may have installed the wrong size awning track if the awning slips out in the wind.
> >
> > Sandra Rutan
> >
> >
> > --- In tabtrailers@yahoogroups.com, "floridatabber" <jojobe22@> wrote:
> > >
> > > Need some advice as to what one does to keep the awning in the track. After struggling to push it through the wind just blows it out. I would appreciate any thoughts. Thanks
> > >
> >
>
0 comments:
Post a Comment