From: Sherrie Barker <grmybrkr@yahoo.com>
To: tabtrailers@yahoogroups.com
Sent: Mon, January 31, 2011 11:56:16 AM
Subject: Re: [tabtrailers] Re: Power Converter question
Sherrie
From: JerryJ <jjerryj@suddenlink.net>
To: tabtrailers@yahoogroups.com
Sent: Sun, January 30, 2011 5:29:12 PM
Subject: [tabtrailers] Re: Power Converter question
Grmy(?), Carol points to the most probable culprit causing your problem, the 15A fuse that connects the converter output to the battery when connected to shore power, and provides the power from the battery back to the 12V distribution buss (where the 15A fuse is) when not connected to shore power. However, there are other connections back to the battery which could cause the problem if they are open. One is the little red rubber covered circuit breaker in series with the hot lead, and is mounted on the tongue frame in the newer models.
Look in the AA_Electrical folder in the Files section for a description of the electrical system. (And let me know if there are things there that are not clear.)
Jerry J
--- In tabtrailers@yahoogroups.com, "grmybrkr" <grmybrkr@...> wrote:
>
> New at this so have a question about the power converter. All is well when the Turtle is plugged into a power source, but when I pull the plug all goes dark. Should the converter take over and signal the battery to become the new power source? I checked the fuses and breakers on the converter and they all seem to be fine. The battery has a full charge according to the battery charger. Am I just impatient? Thanks!
>
0 comments:
Post a Comment