Powered by Blogger.
RSS

[tabtrailers] Re: Resetting backrest w/o requirement to lower to full-flat position

 

Thanks Dale & Joy,

I didn't know this option existed and am glad you posted it here.

I appreciate it!
Theresa
#0576

--- In tabtrailers@yahoogroups.com, "Dale Chaudiere" <Dale.Chaudiere@...> wrote:
>
> I can't believe we have owned our T@B since June 2004, and it took this long to figure this out!
>
> Have you ever stored bedding behind the backrest, then needed to change the position/tilt? In normal operation, if the backrest cannot be dropped to the flat position, the position detent will not reset. With bedding in the way, this can be hard or impossible. Well guess what an easy solution has always existed.
>
> The hinge on each side is a dark gray color. The ratcheting detent is anodized silver color. With the backrest at rest on the bedding, reach down between the cushions on each side and pull/pinch the silver detent toward the front of the trailer. You should hear it click. This resets the detent, just as it does when you lower the backrest to the flat position. Now you can adjust the tilt.
>
> Dale & Joy
> Mellow Yellow #324
> Tow Vehicle 2006 Screaming Yellow Mustang GT
>

__._,_.___
Recent Activity:
.

__,_._,___

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

0 comments:

Post a Comment