Re: [A/S] A/C unit

On Jul 14, 2012, at 11:26 AM, Chris Cavanaugh wrote:

I have noticed that the connector at the end of the ribbon moves on the
wires. Could this be the problem? I will do as you suggest and I have a
small soldering iron so I can touch up the solder on the back of the
board. Thanks for your suggestions.

Chris

——————————————————
No I think that is a Molex connector and the plastic body will move on the pins a little…. that is normal. We are kind of grasping at straws here but it was working when you took it apart and now it doesn't even light up. So a broken wire or bent connector pin would be the first things to look at. A bad solder joint would seem to be a possibility. It is just possible that the board went bad at this time but it would be a strange coincidence.


Tony
2000 Airstream Classic 28'
2009 Chevy Duramax / Allison








------------------------------------

To unsubscribe from this group, go to http://www.groups.yahoo.com/group/AirstreamList/ and unsubscribe. To suspend delivery while traveling, simply change the delivery option to No Mail-Web only.

This site is not sponsored by or affiliated in any way with Airstream Inc, Thor Inc, or the WBCCI.


Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/AirstreamList/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/AirstreamList/join
(Yahoo! ID required)

<*> To change settings via email:
AirstreamList-digest@yahoogroups.com
AirstreamList-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
AirstreamList-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/